User Guide

39
Phoenix – AwardBIOS CMOS Setup Utility
Power User Overclock Settings
Item Help
Asynchronous AGP/PCI Clock 66.0/33.0 MHz
Linear PCIExpress Clock 100
** Current CPU Clock 200MHZ **
CPU Clock at Next Boot is 100
*** Current DRAM Clock 200MHZ ***
DRAM Clock at Next Boot 200MHz(Auto)
CPU Ratio Select Default
CPU Vcore Select Default
CPU Vcore 7-Shift Normal
Over Voltage Enabled
VDIMM Select 2.50V(Default)
SBChip VDD Select 2.55V(Default)
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Power User Overclock Settings
Item Help
Asynchronous AGP/PCI Clock 66.0/33.0 MHz
Linear PCIExpress Clock 100
** Current CPU Clock 200MHZ **
CPU Clock at Next Boot is 100
*** Current DRAM Clock 200MHZ ***
DRAM Clock at Next Boot 200MHz(Auto)
CPU Ratio Select Default
CPU Vcore Select Default
CPU Vcore 7-Shift Normal
Over Voltage Enabled
VDIMM Select 2.50V(Default)
SBChip VDD Select 2.55V(Default)
NBChip VDD Select 1.60V(Default)
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Phoenix – AwardBIOS CMOS Setup Utility
Power User Overclock Settings
Item Help
Asynchronous AGP/PCI Clock 66.0/33.0 MHz
Linear PCIExpress Clock 100
** Current CPU Clock 200MHZ **
CPU Clock at Next Boot is 100
*** Current DRAM Clock 200MHZ ***
DRAM Clock at Next Boot 200MHz(Auto)
CPU Ratio Select Default
CPU Vcore Select Default
CPU Vcore 7-Shift Normal
Over Voltage Enabled
VDIMM Select 2.50V(Default)
SBChip VDD Select 2.55V(Default)
NBChip VDD Select 1.60V(Default)
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
NBChip VDD Select
1.50V ．．．．．[ ]
1.60V(Default)．．．．．[ ]
1.70V ．．．．．[ ]
1.80V ．．．．．[ ]
↑↓:Move ENTER:Accept ESC:Abort
CPU Vcore 7-Shift
Normal ．．．．．[ ]
+ 5% ．．．．．[ ]
+ 10% ．．．．．[ ]
+ 15% ．．．．．[ ]
+ 20% ．．．．．[ ]
+ 25% ．．．．．[ ]
+ 30% ．．．．．[ ]
+ 35% ．．．．．[ ]
↑↓:Move ENTER:Accept ESC:Abort
SBChip VDD Select
2.55V(Default)．．．．．[ ]
2.60V ．．．．．[ ]
2.65V ．．．．．[ ]
2.70V ．．．．．[ ]
↑↓:Move ENTER:Accept ESC:Abort