User Guide

Parallel Port Mode

SPP : Standard Parallel Port

EPP : Enhanced Parallel Port

ECP : Extended Capability Port

SPP/EPP/ECP/ECP+EPP

To operate the onboard parallel port as Standard Parallel Port only, choose “SPP.” To

operate the onboard parallel port in the EPP modes simultaneously, choose “EPP.” By

choosing “ECP”, the onboard parallel port will operate in ECP mode only. Choosing

“ECP+EPP” will allow the onboard parallel port to support both the ECP and EPP

modes simultaneously. The ECP mode has to use the DMA channel, so choose the

onboard parallel port with the ECP feature. After selecting it, the following message

will appear: “ECP Mode Use DMA” at this time, the user can choose between DMA

channels 3 to 1. The onboard parallel port is EPP Spec. compliant, so after the user

chooses the onboard parallel port with the EPP function, the following message will be

displayed on the screen: “EPP Mode Select.” At this time either EPP 1.7 spec. or EPP

1.9 spec. can be chosen.

3-7-3 On-Chip Device Function

On-Chip Device Function

Item Help

USB Controller Enabled

USB Keyboard Support Disabled

** Onboard AC97 Codec is ALC100/200 **

AC97 Sound Enabled

AC97 Modem Auto

Game Port Address 201

Midi Port Address 330

Midi Port IRQ 10

Menu Level >>

↑↓→←

Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help

F5:Previous Values F6:Optimized Defaults F7:Standard Defaults

USB Controller

Select Enabled if your system contains a Universal Serial Bus (USB) controller and you

have a USB peripherals. The settings are: Enabled, Disabled.

USB Keyboard Support

Select Enabled if your system contains a Universal Serial Bus (USB) controller and you

have a USB keyboard. The settings are: Enabled, Disabled.

AC97 Sound

This item allows you to decide to enable/disable the 815 chipset family to support AC97

Audio. The settings are: Enabled, Disabled.