User Guide

35
If an insufficient number of cycles is allowed for the RAS to accumulate its charge before
DRAM refresh, the refresh may be incomplete and the DRAM may fail to retain date. Fast
gives faster performance; and Slow gives more stable performance. This field applies only
when synchronous DRAM is installed in the system. The settings are: 2 and 3.
3-7 Integrated Peripherals
CMOS Setup Utility – Copyright(C) 1984-2001 Award Software
Integrated Peripherals
Item Help
On-Chip IDE Function Press Enter
On-Chip SIO Function Press Enter
On-Chip Device Function Press Enter
Init Display First PCI Slot
Power On Function BUTTON ONLY
KB Power ON Password Enter
Hot Key Power ON Ctrl-F1
POWER After PWR-fail off
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
On-Chip IDE Function
Please refer to section 3-7-1
On-Chip SIO Function
Please refer to section 3-7-2
On-Chip Device Function
Please refer to section 3-7-3
Init Display First
This item allows you to decide to activate whether PCI Slot or on-chip VGA first. The
settings are: PCI Slot, AGP Slot, On-Chip VGA.
Power On Function
This function allows you to select the item to power on the system. The settings are: Button
Only, Mouse Left, Mouse Right, Password, Hotkey, and keyboard 98.