ARROW -MANUAL- 1
TABLE OF CONTENTS Introduction 3 Included In The Box 4 Features And Specs 5 Assembly 6 Safe Riding 12 Charging Battery 13 How To Use The Bike Controls 14 A. Gears B. LCD Display C. Turning the Bike On and Off D. Pedal Assist E. Speedometer F. Walk Mode G. Battery Indicator H. Showing the Mileage I. Error Codes J.
INTRODUCTION Congratulations on your new Jetson Arrow! The Arrow is an innovative and fun personal transportation device, ready to take on everyday use. Before your first ride, check whether the wheels are damaged, or parts are loose. If there are any abnormalities, please contact Jetson Customer Support at 1-(888) 976-9904 or email us at customerservice@jetsonbike.com. This product manual can help you understand, use, and maintain your Arrow.
INCLUDED IN THE BOX 2 3 7 4 8 6 1 9 5 15 13 11 12 1. Front Fork 10. Rear Derailleur 3. Handlebar Stem 12. Pedals 14. Front Wheel 2. 4. 5. 6. 7. 8. 9. 4 14 Handlebar Charging Port Frame Saddle Post Saddle Seat Clamping Lever Seat Tube 11. 13. 15.
2 3 1 1. Left Brake Lever 3. Gear Shifter 2. LCD Display FEATURES AND SPECS MODEL: ARROW MOTOR: 250w WHEEL DIAMETER: 700C MOTOR RATED RPM: 195 MAX SPEED: 20 MPH CHARGER: 110-240V MAX RANGE: 30-35 MILES CHARGE TIME: 4-6 HOURS BATTERY TYPE: LITHIUM ION PRODUCT WEIGHT: 38 LBS BATTERY RATED VOLTAGE: 36v/ 7.
ASSEMBLY The Arrow comes partially assembled. In order to fully assemble, you will need to attach the Handlebars, the Front Wheel, the Disc Brake, and the Saddle. Please refer to the diagrams on pages 4 and 5 while assembling your Arrow. If you are having difficulty assembling the Arrow, please call our customer service or take your Arrow to a local bike shop. Please Note: Pictures may vary slightly from the actual product.
• Place the Handlebar into the Handlebar Stem and screw the 4 bolts in using the provided Allen Key. • Make sure all the wires are connected according to color.
Assembling the Front Disc Brake • Attach the Front Disc Brake to the Front Fork by screwing in the two bolts. Bolts ATTACHING THE FRONT WHEEL • Twist the cap off the Quick Release Clamping Lever and remove it from the Wheel. • Place the Quick Release Clamping Lever to the side.
Lever Cap • Slide the front Tire between the Front Fork. • Hook the Front Fork onto each side of the Tire and slide the Disc Brake into the Disc. •Please be careful not to bend the Disc Brake. If you find that it will not go in smoothly, please call us for assistance or bring the Arrow to your local bike shop. • Now that the front Tire is fit to the Front Fork, slide the Quick Release Clamping Lever through the Front Wheel.
• Make sure the Quick Release Clamping Lever is secure. Push Lever in • Make sure the Brake is hooked onto the Disc and working properly.
ASSEMBLING PEDALS • There are 2 Pedals. Please look at the inside of each Pedal and see which is labeled R (right) and L (left). • To connect the Pedals to the bike, place L into the Left tube and R into the Right tube (left and right directions are as though you are sitting on the bike). Tighten by turning the Pedals toward the Front Wheel. Use a wrench to make sure the Pedals are tight and secure.
ATTACHING THE SADDLE • Slide the Saddle Post into the Saddle Tube. • Align the Saddle with the Frame to make sure it is straight. • Tighten the Saddle Clamping Lever. • The height of the Saddle should not be pulled higher than the safety tick marks on the Saddle Post. SAFE RIDING Before each ride, check whether all the bolts are tight, the battery power is full, the charging port is covered, the tire pressure is sufficient, all wires are plugged in, and the brake system works correctly.
CHARGING THE BATTERY Your Arrow comes with a built-in rechargeable lithium battery. Always use the provided charger only. Before your first ride you must fully charge the Arrow. Charge for 12 hours for the first 3 times you use it. The Charging Port is located on the left side of the frame near the Handlebar Stem (see digram on P. 4 for reference). For every ride after, charge your Arrow until it is fully charged, and NOT LONGER.
HOW TO USE THE BIKE CONTROLS Be cautious as you become accustomed to the Arrow. There are 9 levels of Pedal Assist. The Pedal Assist should be set at 0 when you’re first getting on the Arrow. GEARS The Arrow is a 9-speed e-bike. You can change gears by using the Shifter on the handlebar. Only shift gears when pedaling. These gears do not require battery power, and if the battery runs out, you can still use these gears.
If the LCD Display does not turn on, check that the battery is charged and the LCD Display is fully connected. If you are still having issues, please contact Jetson support. PEDAL ASSIST The Pedal Assist mode was designed to make riding an e-bike mimic the natural motion you are used to feeling when riding a bicycle. As you pedal your bike, a sensor is activated, which in turn generates power from the motor.
BATTERY INDICATOR The battery charge level is indicated by the bars at the top of the LCD Display. When all the bars are lit up the battery is fully charged. When only one bar is left, the bike needs to be charged. MOTOR POWER INDICATOR The power of the motor is indicated in the upper right-hand corner of the LCD Display. ERROR CODES If there is an error with the function of the bike an error message will appear on the LCD Display along with an error code.
- Clear Trip - Press the Up or Down button to choose YES or NO to clear the trip distance. The default value is NO. If you choose YES and press the Power Button (M) to confirm the option, the display will show OK and return to the general selection settings interface. - Set Unit - Choose between the Imperial (mph) and Metric (km/h) system by pressing the Up and Down Buttons. Press the Power Button (M) to confirm your choice. - Set WD - Set the wheel diameter by pressing the Up and Down Buttons.
WEIGHT LIMIT The maximum load is 300 lbs. Going above the maximum weight limit can cause injury or damage the bicycle. CLEANING THE ARROW To clean the Arrow carefully wipe with a damp cloth, then dry with a dry cloth. Do not use water to clean the Arrow, as the electrical and electronic systems may get wet, resulting in personal injury or malfunction of the bicycle. Lube the chain every so often to keep it smooth. BATTERY • Keep the bike away from fire and excessive heat.
SAFETY WARNINGS Here are some useful tips to make sure you always have a safe ride: • Children, the elderly, and pregnant women should not use the Arrow. • Do not ride after drinking or taking prescription medication. • Do not carry items when riding. • Prior to each ride, inspect each part of the Arrow to ensure it has been maintained correctly and is functioning properly. • Always give way to pedestrians. • Always comply with local traffic laws and regulations.
CALIFORNIA WARNING This product contains chemicals, including lead, which are known to the state of California to cause cancer, birth defects, and other medical conditions. MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the Arrow or any components of the unit. This will void any warranty, and can lead to malfunctions which may cause injury. ADDITIONAL OPERATION CAUTIONS Do not lift the Arrow off the ground while it is in operation and the wheels are in motion.
LIMITED 1 YEAR WARRANTY TO QUALIFY FOR WARRANTY SERVICE: 1. You must present a copy of the sales receipt from an approved retail partner within 90 days of purchase. 2. This product cannot be used for rental or commercial use. 3. This product cannot be used for competition. LIMITATIONS OF LIABILITY • This Limited 1 Year Warranty is non-transferable after the product’s initial sale.
PRODUCT REGISTRATION Please complete and mail this card within 10 days of purchase or go to https://www.ridejetson.com/product-registration.
ARROW
