Owners manual

16
Jetpik doesn’t start.
Battery not charged.
Be sure the power charger is functioning
and the red LED is on when placed in the
cradle. Fully charge for 24 hours and try
again.
Power tooth brush is not running.
Instead the handle motor is running
Brush tip is not in position or brush motor is
dead
Pull out and reinsert the brush tip into
handle.
Replace the brush tip.
Don’t see the blue light glows the top
window of the UV sanitizer or the
green LED is not light up
1. Not connected to power source.
2. The drawer is not fully inserting.
3. Charger is defective.
4. UV sanitizer is defective.
Check the adapter and wires to make
sure it is fully inserted to mains.
Reinsert the drawer into the sanitizer.
Replace the UV sanitizer or charger.