User Manual

evo
EN
6
Choose model type, content
of menus are automatically
adapted for chosen model
type.
Number of motor poles -
set the number of motor
p o l e s r e g a r d s m o t o r
producer information.
Motor KV - set value of motor`s KV regards motor producer
information. If both of above-mentioned parameters are
unknown see *CM.
Rotor Gear - set gear ratio between motor and helicopter`s rotor
MAX rpm (gear out) - set
revolution of helicopter`s
rotor regards recommen-
dation helicopter producer
Autorotating mode - see
*CM
Gove rnor set ting - we
recommend to keep „Auto”,
„Auto +0%”. If automatic
values are not suitable see
*CM.
Other possibilities - see chapter „Basic parameters”.
3.3 Configuration procedure for helicopters