User Manual

evo
EN
2.2 MEZON EVO OPTO controllers
MEZON EVO OPTO controllers have input separation by
optocoupler and BEC power supply is not available. For correct
functionality it is necessary to supply receiver, servos and other
electronic equipment with an external battery. Instead of
a battery, it's also possible to use a separate power supply (JETI
SBEC 30D EX for example, po-wered direct from main
accumulator).
3
listed values are valid with sufficient air flow cooling
If you don´t want to use BEC power supply, take out from JR
connectors middle pins (red wired) and isolate correctly.
Switching BEC technical data
average current
15A
max. current
30A (1s)
max. temperature
100°C
Pic. 2 -standard connection between controller and receiver suitable
for JETI Duplex transmitters users
M
Ext.
Y1
evo
85opto
EX BUS
Nominal capacity: 3.1Ah
Voltage: max. 8.2V
RECEIVER BATTERY
Telemetry
Battery
Receiver battery
Throttle
channel