User Manual

evo
EN
2
- black JR connector is connected into throttle channel output of
receiver
- red JR connector is connected into receiver output Ext., E1 or E2
If E1 or E2 receiver output is used then user has to manually
configure E1 or E2 output to „EX Bus” functionality.
REX receivers dispose of automatic communication detection
and manual configuration is not necessary.
For elderly Rx receivers
configure "EX Bus" in menu
„ M o d e l > D e v i c e
Explorer>receiver>Serial
link”.
- for sufficient power supply
f ro m B E C w e s t rong l y
recommend connect both
of JR connectors
2.1 MEZON EVO BEC controllers
Pic.1 - standard connection between controller and receiver suitable
for JETI Duplex transmitters users
M
Ext.
Y1
evo
80bec
Switch BEC
Battery
Trottle channel
BEC output
EX Bus
BEC output