Installation Manual

CONFIDENTIAL
RF Module Installation Manual
JETCO Model JTR-01
February 27, 2019
JTR-01 RF Module - Installation Manual.docx 2019-02-27 Page
4
of 8
5. If the Base Station responds as above, it is set up correctly. If it doesn’t respond,
check that the power supply is connected and has AC power and that the USB cable
is correctly connected. Repeat steps 1 through 5.
Image: Typical Base Station Installation (with enclosure)
The image shows a typical Base Station module in an enclosure, attached to AC power and a computer
USB port.
JTR
-
01
-
B Base Station Module
installed in enclosure