Product Manual

6
Levers and Controls
Specifications
Model JWJ-8CS JWJ-8HH
Stock Number – Bed and Stand Kit ...........................................718200K ..................................... 718250K
Stock Number – Bed Assembly ................................................ 718200J ...................................... 718250J
Stock Number – Stand ..............................................................718200S ..................................... 718250S
Cutting Capacity .................................................................. 8"W x 1/2"D ................................ 8"W x 1/2"D
Cutterhead Speed ................................................................. 5500 RPM ................................... 5500 RPM
Number of Knives .................................................................................3 ............................ 36 knife inserts
Rabbeting Capacity ......................................................................... 1/2" .............................. not applicable
Rabbet Ledge ...................................................................3-1/8" x 8-3/4" ............................. 3-1/8" x 8-3/4"
Table Surface ....................................................................... 9”W x 72”L .................................. 9”W x 72”L
Fence ........................................................................4-3/4”W x 38-1/2”L ...................... 4-3/4”W x 38-1/2”L
Knife Size ............................................................. 8”L x 11/16”W x 1/8”T .............. 0.59”L x 0.59”W x 0.10T
Fence Tilt .............................................................................. 45ºL, 45ºR ................................. 45ºL, 45ºR
Positive Stops................................................................. 45ºL, 90º, 45ºR ........................... 45ºL, 90º, 45ºR
Motor ........................................................... 2HP, 1Ph, 60Hz, 230V only ......... 2HP, 1Ph, 60Hz, 230V only
Net Weight, Jointer and Stand (approx.) .................................... 375 lbs. ........................................ 379 lbs
Shipping Weight, Jointer and Stand ........................................... 452 lbs. ........................................ 456 lbs
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, JET reserves the right to change specifications at any time and without prior
notice, without incurring obligations.
1. Handwheel for Outfeed Table 8. On/Off Switch (Pedestal style on JWJ-8HH)
2. Outfeed Table 9. Rabbeting Ledge
3. Fence 10. Table Lock Knob
4. Fence Adjustment Handle 11. Fence Tilt Lock Handle
5. Cutter Guard 12. Fence Control Handle
6. Infeed Table 13. Belt Guard
7. Handwheel for Infeed Table 14. Dust Chute