Specification Sheet

JMD-18 MILL/DRILL WITH R-8

TAPER 115/230V 1PH

350018

Mill drills are a lighter alternative to a milling machine. These combine a belt

driven drill press with the dual coordinate abilities of the milling machine's table

for flexibility and efficiency. A locking collet prevents the cutting tool from falling

away from the spindle when lateral forces are experienced against the bit.

Although light in construction, the JMD Milling Drilling Machines possess the

advantages of space-saving versatility, affordability and light machining

capability.

For added safety, the JMD-18 follows strict guidelines and electrical

requirements to be certified by CSA Group

One-piece cast iron column for added support

Belt cover with quick slide latch allows faster belt adjustment to change

spindle speeds

Base taper allows for easier clean up

Drill Press angle vise

UL Listed motor

Extra large worktable

New positive quick-stop knob and easy to read internal depth gauge (external

on JMD-15)

360°headswivel

Work lamp

Heavy-duty power downfeed with manual fine feed (JMD-18PFN)

½”drillchuck,chuckarbor

Draw bar

Drill Chuck Guard

Adjustable Carbide facemill

FEATURES

JET RED ASSURANCE 2-YEAR WARRANTY

JET warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the

United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair,

assist you in obtaining parts, or perform routine maintenance and major repair on your JET tools. For the name of an Authorized Service Center

in your area call 1-800-274-6848.

PAGE 1
JMD-18 MILL/DRILL WITH R-8 TAPER 115/230V 1PH 350018 Mill drills are a lighter alternative to a milling machine. These combine a belt driven drill press with the dual coordinate abilities of the milling machine's table for flexibility and efficiency. A locking collet prevents the cutting tool from falling away from the spindle when lateral forces are experienced against the bit.
PAGE 2
JMD-18 MILL/DRILL WITH R-8 TAPER 115/230V 1PH 350018 SPECIFICATIONS Drilling Capacity (In.) 1-1/4 Face Mill Capacity (In.) 3 End Mill Capacity (In.) 3/4 Swing (In.) 15-7/8 Max Distance Spindle to Table (In.) 18 Spindle Taper (In. x TPI) R-8 Spindle Travel (In.) 5 Quill Diameter (In.) 3 Column Diameter (In.) 4-1/2 Number of Spindle Speeds 12 Range of Spindle Speeds (RPM) 150 - 3,000 Table Size (L x W) (In.) 9-1/2 x 32-1/4 Table Longitudinal Travel (In.
PAGE 3
JMD-18 MILL/DRILL WITH R-8 TAPER 115/230V 1PH 350018 FULL SERIES STOCK NO MODEL NO POWERFEED 350017 JMD-15 350116 JMD-15 350125 JMD-15 350018 JMD-18 350119 JMD-18 350401 JMD-18 350126 JMD-18 350127 JMD-18 X-Axis 350020 JMD-18PFN Downfeed 350402 JMD-18PFN Down Feed 350120 JMD-18PFN 350128 350129 DIGITAL READOUT DRILLING CAPACITY (IN.) FACE MILL CAPACITY (IN.) END MILL CAPACITY (IN.