Product Manual

6
JAT-452 Angle Grinder
Tool specifications
Model number JAT-452
Stock number 505452
Wheel size 7 in. diameter
Wheel type Type 27
Spindle thread (in./TPI) 5/8-11 UNC
Horsepower 1.3
Maximum speed 8500 RPM
Average air consumption 6 CFM
Air Inlet 3/8 in. NPT
Air Hose inside diameter 3/8 in.
Required air pressure 90 psi (6.2 bar)
Vibration value 4.3 m/s
2
Noise level
1
104 dB(A)
Speed settings Variable throttle lever
Overall length 13-3/4 in. (349.25 mm)
Housing material Aluminum with TPE molded grip
Net weight 8.00 lb. (3.63 kg)
Shipping weight 9.44 lb. (4.28 kg)
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.