This .pdf document is bookmarked Operating Instructions and Parts Manual Hydraulic Shop Presses Models HP-5A/15A/35A Model HP-35A shown JET 427 New Sanford Road LaVergne, Tennessee 37086 Ph.: 800-274-6848 www.jettools.com Part No.
1.0 Warranty and Service ® JET warrants every product it sells against manufacturers’ defects. If one of our tools needs service or repair, please contact Technical Service by calling 1-800-274-6846, 8AM to 5PM CST, Monday through Friday. Warranty Period The general warranty lasts for the time period specified in the literature included with your product or on the official JET branded website. • JET products carry a limited warranty which varies in duration based upon the product.
2.0 Table of Contents Section Page 1.0 Warranty and Service ..................................................................................................................................... 2 2.0 Table of Contents ........................................................................................................................................... 3 3.0 Safety warnings...................................................................................................................................
3.0 Safety warnings 1. Read and understand all safety warnings on the machine and in this manual. 2. Replace warning labels if they become obscured or removed. 3. This press is designed and intended for use by properly trained and experienced personnel only. If you are not familiar with the proper and safe operation of a hydraulic press, do not use until proper training and knowledge have been obtained. 4. Do not operate this press beyond its rated capacity. Use pressure gauge to determine load. 5.
4.0 Specifications Model Number .......................................... HP-5A...................................... HP-15A ................................... HP-35A Stock Number .........................................331406.......................................331416 .................................... 331431 Capacity (ton) ....................................................5...............................................15 ............................................ 35 Ram Diameter (in.) ........
5.
6.0 Assembly 6. If desired, slide ram assembly laterally (15and 35-ton models only) by mounting the hand crank onto the lateral shaft and rotating it. Do not attempt to slide ram during operation. 7. The handwheel can be used to rapidly adjust the ram extension screw into or out of the plunger. Refer to Figure 1 for identification. 1. Use a lifting device, such as a hoist or forklift with straps, to position machine upright. 2.
9.1.
.1.2 HP-5A Head Assembly – Parts List Index No. Part No. Description Size Qty 1 ................ HP5A-1...................... Hydraulic Base.................................................. ............................................. 1 2 ................ HP5A-2...................... Cylinder............................................................. ............................................. 1 3 ................ HP5A-3...................... Base Filter ** .......................................
9.2.
9.2.2 HP-5A Frame Assembly – Parts List Index No. Part No. Description Size Qty 52 .............. HP5A-52.................... Frame Bracket .................................................. ............................................. 2 53 .............. TS-0060051 .............. Hex Cap Screw ................................................. 3/8”-16 x 1” .......................... 4 54 .............. TS-0561031 .............. Hex Nut .............................................................
9.3.
9.3.2 HP-15A Head Assembly – Parts List Index No. Part No. Description Size Qty 1 ................ HP15A-01.................. Hydraulic Base.................................................. ............................................. 1 1A .............. HP15A-01A ............... Base Seal **...................................................... ............................................. 1 2 ................ HP15A-02.................. Cylinder........................................................
Index No. Part No. Description Size Qty 38 .............. HP15A-38.................. Fixed Screw ...................................................... ............................................. 1 39 .............. HP15A-39.................. Spacer .............................................................. ............................................. 1 40 .............. HP15A-40.................. Pin..................................................................... ...........................
9.4.
9.4.2 HP-15A Frame Assembly – Parts List Index No. Part No. Description Size Qty 42 .............. HP15A-42.................. Shaft Holder ...................................................... ............................................. 1 42A ............ TS-0070011 .............. Hex Cap Screw ................................................. 1/2”-13 x 1” .......................... 2 43 .............. HP15A-43.................. Rolling Shaft Block without Thread ................... .................
9.5.
9.5.2 HP-35A Head Assembly – Parts List Index No. Part No. Description Size Qty 1 ................ HP35A-01.................. Base.................................................................. ............................................. 1 1A .............. HP35A-01A ............... Base Filter ** ..................................................... ............................................. 2 2 ................ HP35A-02.................. Cylinder................................................
Index No. Part No. Description Size Qty 28B ............ HP35A-28B ............... Steel Ball........................................................... ............................................. 1 28C............ HP35A-28C ............... Safety Spring .................................................... ............................................. 1 28D............ HP35A-28D ............... Safety Valve Set Screw .................................... .............................................
9.6.
9.6.2 HP-35A Frame Assembly – Parts List Index No. Part No. Description Size Qty 42 .............. HP35A-42.................. Shaft Holder ...................................................... ............................................. 1 42A ............ HP35A-42A ............... Hex Cap Head Bolt ........................................... ............................................. 2 43 .............. HP35A-43.................. Rolling Shaft Block............................................ ....
This page intentionally left blank.
This page intentionally left blank 23
427 New Sanford Road LaVergne, Tennessee 37086 Phone: 800-274-6848 www.jettools.
