Product Manual

27. Keep hands away from the moving rolls.

28. Provide for adequate space surrounding work

area and non-glare, overhead lighting.

29. Don't use in dangerous environment. Don't use

power tools in damp or wet locations, or expose

them to rain.

30. Do not stand on the machine. Serious injury

could occur if the machine tips over.

31. Never leave the machine running unattended.

Turn the power off and do not leave the

machine until it comes to a complete stop.

32. Use only JET factory authorized replacement

parts and accessories; otherwise, the warranty

and guarantee are null and void.

33. The plate roller should be anchored to the floor.

34. Use proper extension cord. Make sure your

extension cord is in good condition. When using

an extension cord, be sure to use one heavy

enough to carry the current your product will

draw. An undersized cord will cause a drop in

line voltage resulting in loss of power and

overheating. Table 1 (sect. 8.3) shows correct

size to use depending on cord length and

nameplate ampere rating. If in doubt, use the

next heavier gage. The smaller the gage

number, the heavier the cord.

Familiarize yourself with the following safety notices used in this manual:

This means that if precautions are not heeded, it may result in minor injury and/or possible

machine damage.

This means that if precautions are not heeded, it may result in serious, or possibly even fatal,

injury.

SAVE THESE INSTRUCTIONS

2.0 About this manual

This manual is provided by JET, covering the safe operation and maintenance procedures for a JET Model EPR-

1460 Electric Plate Roller. This manual contains instructions on installation, safety precautions, general operating

procedures, maintenance instructions and parts breakdown. Your machine has been designed and constructed

to provide consistent, long-term operation if used in accordance with the instructions as set forth in this document.

If there are questions or comments, please contact your local supplier or JET. JET can also be reached at our

web site: www.jettools.com.

Retain this manual for future reference. If the machine transfers ownership, the manual should accompany it.

Read and understand the entire contents of this manual before attempting assembly or

operation! Failure to comply may cause serious injury!

http://www.jettools.com/us/en/service-and-support/warranty/registration/