Use and Care Manual
Table Of Contents
- JLP-A Series Manual Lever Hoists/Pullers
- Warranty and Service
- Table of Contents
- Warnings
- Introduction
- Specifications (JLP-025A, -050A)
- Specifications (JLP-075A, -150A, -300A, -600A)
- Unpacking
- Installation
- Pre-Operation Inspection
- Operation
- Precautions
- Point Hooks
- Inspection and Maintenance
- Wear Limits
- Timing Marks for Gear Replacement
- Parts
6
Specifications (JLP-025A, -050A)
Stock
Number
Description
Rated
Capcty.
(ton)
Std.
Lift
(ft.)
Min. Distance
between
hooks (in.)
“A”
No.
of
falls
Load
Chain
Ø x Pitch
(mm)
Lift per
full turn
of lever
(in.)
Lbs.
Pull
to Lift
capacity
Lever
Length
(in.)
“B”
(in.)
“C”
Overall
width
(in.)
“D”
Hook
Throat
Opening
(in.)
“E”
Net
Weight
(lbs)
287100 JLP-025A-5 1/4 5 8.27 1 4x12 3.02 60 5.91 2.44 3.1 1.40 4.56
287101 JLP-025A-10 1/4 10 8.27 1 4x12 3.02 60 5.91 2.44 3.1 1.40 5.82
287102 JLP-025A-15 1/4 15 8.27 1 4x12 3.02 60 5.91 2.44 3.1 1.40 7.08
287200 JLP-050A-5 1/2 5 10.04 1 4.3x12 2.83 86 8.46 2.68 3.74 1.38 5.18
287201 JLP-050A-10 1/2 10 10.04 1 4.3x12 2.83 86 8.46 2.68 3.74 1.38 6.82
287202 JLP-050A-15 1/2 15 10.04 1 4.3x12 2.83 86 8.46 2.68 3.74 1.38 8.31
NOTE: The above stock numbers are representative; chain is available in other lengths. Specify length when
ordering.