Use and Care Manual
Table Of Contents
- JLP-A Series Manual Lever Hoists/Pullers
- Warranty and Service
- Table of Contents
- Warnings
- Introduction
- Specifications (JLP-025A, -050A)
- Specifications (JLP-075A, -150A, -300A, -600A)
- Unpacking
- Installation
- Pre-Operation Inspection
- Operation
- Precautions
- Point Hooks
- Inspection and Maintenance
- Wear Limits
- Timing Marks for Gear Replacement
- Parts
13
Brake Disc Wear Limits
The brake disc wear indicator on the handwheel
(Figure 14) will move to the left as the brake wears.
When indicator reaches left side of diagram, the
brake must be replaced.
Figure 14
Figure 15
Capacity D (in) d (in) tn (in) tv(in)
0.25 t 1.38 0.87 0.14
0.12
0.5 t 1.89 1.00 0.12 0.10
0.75 t 2.13 1.34 0.14 0.12
1.5 t 2.56 1.59 0.14
0.12
3 t 2.56 1.59 0.14 0.12
6 t 2.56 1.59 0.14 0.12
d = Inner diameter
D = Outer diameter
tn = Normal measurement
tv = Replacement limit