Service Cart Assembly And Parts Manual

Assembly and Parts Manual

SC-1630/2436 Service Cart

WARNING

• Read instructions before assembly.

• Improper assembly can cause personal injury, and/or property damage.

• Maximum load is 500 lbs. distributed evenly.

• Do not overload cart.

• Do not use the cart as a toy.

Assembly (refer to parts list on reverse side)

1. Attach the swivel/fixed casters to the bottom tray using (16) M8x16 hex cap screws, (32) M8 flat

washers, (16) M8 lock washers and (16) M8 hex nuts. Tighten all hardware.

2. Attach the four metal supports to the bottom tray using (16) M6x12 cap screws, (32) M6 flat washers,

(16) M6 lock washers and (16) M6 hex nuts. Leave hardware loose until top tray has been installed.

3. While installing the top tray, attach the handle to the same end that has the swivel casters. Use (16)

M6x12 hex cap screws, (32) M6 flat washers, (16) M6 lock washers and (16) M6 hex nuts.

4. Tighten all hardware.

WMH TOOL GROUP

2420 Vantage Drive

Elgin, Illinois 60123 Part No. M-140023

Ph.: 800-274-6848 Revision G 12/04

PAGE 1
Assembly and Parts Manual SC-1630/2436 Service Cart WARNING • • Read instructions before assembly. Improper assembly can cause personal injury, and/or property damage. • Maximum load is 500 lbs. distributed evenly. • Do not overload cart. • Do not use the cart as a toy. Assembly (refer to parts list on reverse side) 1. Attach the swivel/fixed casters to the bottom tray using (16) M8x16 hex cap screws, (32) M8 flat washers, (16) M8 lock washers and (16) M8 hex nuts. Tighten all hardware. 2.
PAGE 2
Parts List for the SC-1630 and SC-2436 Index No. Part No. Description Size Qty .................140023.................... Service Cart, Model SC-1630............................. ..................................... .................140024.................... Service Cart, Model SC-2436............................. ..................................... 1...............TS-1482021 ............ Hex Cap Screw.................................................. M6x12mm................. 32 2...............