Spec Sheet

GROUP
JET-TECH is a registered trade mark of MVP Group.
Specifications subject to change without notice.
• Stainless steel pump impeller provides greater durability
• Standard insulated top and side panels
• Stainless steel upper and lower wash/rinse arms are
interchangeable and easily removed for cleaning
• Body, external housing and all chasis components in
brushed stainless steel AISI 304
• Door safety switch
• Adjustable peristaltic pumps for detergent, rinse
and sanitizer
• Door opening of 15”
• Reliable mechanical type cam timer
• Detergent/chemical connections
• Delime switch
• Cycle counter
•
Automatic drain vavle mechanisme assists to drain water up
• to a height of 36”
• Standard equipment includes: One open combination rack
of one peg dish rack 19.75” x 19.75” (500 mm x 500 mm)
MVP GROUP CORP.
5659 Royalmount Ave., Montreal, Qc, Canada H4P 2P9
TEL: [phone] - TOLL FREE: [phone]
FAX: [phone] - TOLL FREE FAX: [phone]
www.mvpgroupcorp.com - [e-mail]
C O N S T R U C T I O N F E AT U R E S
• 37 racks per hourRack capacity:
• 90 secondsComplete operating cycle:
• 1.0 U.S. gallonsWater consumption:
• 0.75 H.P.Motor-pump:
• Electrical: 115/60/1
• 13.0 Amps / cord and plug includedAmperage:
• 1/2” hot water supply 140°F (60°C)Water supply:
• 25 PSI (dynamic) (PRV may be required)Flow Pressure:
• : 3/4“ male hose connectorWater inlet connection
(hose included)
• 1” ID (25.4 mm) Max. height 36”Drain connection:
(915 mm) (hose included)
• : 178 lbs (81 kg)Shipping weight
T E C H N I C A L F E AT U R E S
• Fully automatic washing and rinsing operation with integrated
chemical injection system
• Wash tank heater to keep water warmer longer
• Sanitary labyrinth door eliminates any gasket
• Deep drawn one piece unified inner chamber
• Rinse-additive pump for sparkling results
• Detergent pump for consistent results
• Chemical sanitizing pump
• Just the push of one button fills the wash tank
• New and improved wash arm design
• Highest quality fabrication using the most advanced
machinery will ensure long-life and increased durability
• Slide out control panel for ease of service and maintenance
P E R F O R M A N C E F E AT U R E S
• Pressure reducing valve (PRV) kit
O P T I O N A L A C C E S S O R I E S
WARRANTY: 1 year parts and labor. Certain conditions apply. See Owner’s Manual for details.
SIDE VIEW
24"
19"
13"
A
B
C
A: 4"
B: 15"
C: 18"
33 ½"
23 ½"
2016-10
FRONT VIEW
REAR VIEW