Spec Sheet

Helping personnel
Our pot/pan washers will ease the tedious
cleaning operations at the end of the day
thanks to the Total Clean Concept. Operation
is intuitive and machine control is made
through a soft touch low tension electric panel
with few push buttons, clear pilot lights and
digital display to see the washing and rinsing
temperatures. The same display also shows
the self-diagnostic system’s messages which
control the main electric components.
Ensuring hygiene
The guarantee of a rinse always at a sanitation
temperature is given by the sophisticated
electronic Thermostop that doesn’t permit the
start of this crucial phase if the water isn’t at
the correct temperature. The double-walled
construction and the particular washing
circuit’s architecture allows for extraordinary
silent operation. The reduction of the
consuption of water and chemicals products
decreases the impact of every single cycle on
the environment. We allow you to comply with
HACCP requirements in an easy and
economical way.
JET-TECH MODEL 777
Ideal for medium scale washing
applications, the 777 comes equipped
with a 27.5’’ x 27.5’’ (70 cm. x 70 cm.)
stainless steel basket with a 33.5” (85 cm.)
door opening. The basket’s easy slide
guides greatly reduce the effort of their
movement for the operator. Three
automatic programs ranging up to
ten minute cycle lengths.
JET-TECH MODEL 787
Ideal for large scale washing
applications, the 787 comes equipped
with a 52.0’’ x 27.5’’ (132 cm. x 70 cm.)
stainless steel basket with a 33.5”
(85 cm.) door opening. The basket’s
easy slide guides greatly reduce the
effort of their movement for the operator.
The 787 is very capable of washing
large numbers of wares to allow the
greatest flexibility of usage.
Incorporating our exclusive half-load
function; activating only one of two
pumps saving valuable energy during
slower periods. Three automatic
programs ranging up to ten
minute cycle lengths.
Total Clean Concept
Both our 777 & 787 pot, pan and utensil washer series are equipped with
deep-drawn inner tanks without welds; which fully complies with the most extreme
sanitary rules. The double integrated waste filters retain the largest particles, then
carried to collection baskets which are easily removed. Lastly, the internal pumps
are self-draining in order to avoid any odors when the machine is shut off.
CRP
CRP is the technology developed for end-users that expect absolute perfection.
The CRP rinse permits you to enjoy the consistent quality results obtained; as the
rinse water’s temperature will not change for the total cycle duration. The water
capacity and pressure are guaranteed by a built-in booster; not directly supplied
from the incoming water line; but through an intermediate holding tank with a rinsing
pump also located within the machine body as standard equipment.
Low voltage soft touch
control panel
Wash & Rinse Arm Assembly
Deep drawn tank
The ultimate in Sanitation
JET-TECH POT, PAN & UTENSIL WASHERS
FEATURE
Thermostop
Quick Ready
CRP System
Automatic start
Cycle counter (partial and total)
Half load function (787)
DESCRIPTION
If correct rinse temperature (176°F.-184°F) has not
been reached, wash cycle is extended
Enables tank filling with hot water coming from booster
Ensures constant rinse pressure and temperature
When door is closed, cycle starts automatically
Counts working cycle of the day and cumulative
working cycles to the date
It is possible to use half machine (only model 787)
having two separate washing and rinsing systems.
Machine will indicate that right hand side only is
working
ADVANTAGE
Ensures correct rinse temperature
Machines reaches faster working
temperature
Optimum rinsing results
Easy operation
Useful for chemical companies and
end user
Avoids unnecessary operating costs
in case of low output requirements
JET-TECH MODEL 777 JET-TECH MODEL 787
Tank temperature
Booster temperature
Tank capacity
Booster capacity
Water consuption
Fill water temp.
Fill water pressure
Fill hose connection
Drain hose diameter
Motor
Voltage
Amperage
Tank
Booster
Washing pump
Rinsing pump
TOTAL LOAD
165°F (74°C)
190°F (88°C)
17,96 gal (68 litres)
3,17 gal (12 litres)
1,60 gal (6,1 litres)
59°F (15°C) - 149°F (65°C)
18-40 lbs (1-3 bar)
G 3/4’’ M
1.5’’ (38 mm)
4 H.P.
208V 3 phase 60 hz.
36A
8000W
8000W
3000W
250W
11250W
Tank temperature
Booster temperature
Tank capacity
Booster capacity
Water consuption
Fill water temp.
Fill water pressure
Fill hose connection
Drain hose diameter
Motor
Voltage
Amperage
Tank
Booster
Washing pump
Rinsing pump
TOTAL LOAD
165°F (74°C)
190°F (88°C)
34,6 gal (131 litres)
4,49 gal (17 litres)
3,19 gal (12,1 litres)
59°F (15°C) - 149°F (65°C)
18-40 lbs (1-3 bar)
G 3/4’’ M
1.5’’ (38 mm)
2 x 4 H.P. =8 HP TOTAL
208V 3 phase 60 hz.
45A
8000W
8000 W
2 x 3000W = 6000W TOTAL
2 x 250W
14250W
Autodrain wash pump
Rinse-aid dispensing pump
Stainless steel wash arms
Double walled insulated body
Double filter drain system
SOFTWARE SYSTEMS STANDARD
OPTIONAL EQUIPMENT
Thermostop system
Quick ready system
CRP system
Automatic start
Cycle counter (partial and total)
Detergent dispenser
Low level detergent sensor
Low level rinse sensor
291 sec 16 sec 23 sec 330 sec
561 sec 16 sec 23 sec 600 sec
WASHING PAUSE RINSING TOTAL CYCLE
141 sec 16 sec 23 sec 180 sec
291 sec 16 sec 23 sec 330 sec
33.5’’ x 33.5’’ x 75’’ (85 x 85 x 190 cm)
561 sec 16 sec 23 sec 600 sec
27.55’’ x 27.55’’ (70 x 70 cm)
33.46’’ (85 cm)
Dimension WxDxH
Rack Dimensions
Door opening
TIME
Program 1
Program 2
Program 3
Dimension WxDxH
Rack Dimensions
Door opening
TIME
Program 1
Program 2
Program 3
58’’ x 33.5’’ x 75’’ (147 x 85 x 190 cm)
52’’ x 27.55’’ (132 x 70 cm)
33.46’’ (85 cm)
WASHING PROGRAM WASHING PROGRAM
TEMPERATURE
WATER
TEMPERATURE
WATER
ELECTRIC
ELECTRIC
WASHING PAUSE RINSING TOTAL CYCLE
141 sec 16 sec 23 sec 180 sec