JET TECH TECHNICAL MANUAL 737E VER1.
Contacts Technical Support 1-888-275-4538 Robert Marsolais Alan Gallagher Jonathan Menard Richard M. Hiller Service Service Service Special Manager Consultant Consultant Projects Manager 225 214 230 211 robert@mvpgroupcorp.com alan@mvpgroupcorp.com jonathan@mvpgroupcorp.com richard@mvpgroupcorp.com service @mvpgroupcorp.com Tools Some of the tools you will need to repair and service the 737e. US Metric (inches) (mm) 1/8 3.18 5/32 3.97 4 3/16 4.76 13/64 5.16 7/32 5.56 15/64 6.
Top of 737e 20732 20067 20173 20713 20714 20104 20715 20716 20718 3
Wash Cycles 4m 3m 2m Cycle Start Display Drain Unused ON/OFF Touch-Pad Final Rinse Probe temperature probe Wash Tank Temperature probe rinse booster Power line L1 Power line L2 Door switch signal Water level signal Booster Heat Power Line L2 Wash Heat Wash Incoming Water (chemicals) Drainage 4
ELECTRONIC BOARD PROGRAMMING START B C A D MENU ACCESS Level 1 Level 1 access will allow you to change the first 4 settings. 1 2 3 TURN THE MACHINE ON AND OFF BY PRESSING BUTTON A. (IF THE MACHINE IS ALREADY ON, TURN IT OFF BY PRESSING BUTTON A) PRESS BUTTON B SEVEN (7) TIMES WITHIN (10) SECONDS FROM TURNING OFF MACHINE. PRESS AND KEEP PRESSING BUTTON C ONCE QUICKLY. “P-00 STOP” WILL BE ON THE DISPLAY. MODIFY PARAMETERS 1 2 3 SELECT A PARAMETER BY SCROLLING THROUGH THE MENU WITH BUTTON B.
P-00 STOP P-01 T-BL AVAILABLE PARAMETERS Thermostop 0= not active 1=active default:0 P-02 T-VA Temperature boiler Min 60C 140F Max 95C 200F Default 85C 185F THERMOSTOP 0 = not active 1 = active ∗DEFAULT 0=NOT ACTIVE MAX DRAIN TANK Min 1 min Max 20 min ∗DEFAULT 2 min DON’T MODIFY TEMPERATURE BOILER Min 60°C Max 95°C ∗DEFAULT 85°C MAX LOADING TANK Min 1 min Max 20 min ∗DEFAULT 10 min DON’T MODIFY Temperature Tank Set to 70C 160F Default 60C 140F TEMPERATURE TANK Min 40°C Max 65°C ∗DEFAULT 60°C SOF
Level 2 Level 2 access will allow you to change all 14 settings. 1 2 3 TURN THE MACHINE ON AND OFF BY PRESSING BUTTON A. (IF THE MACHINE IS ALREADY ON, TURN IT OFF BY PRESSING BUTTON A) PRESS BUTTON B SEVEN (7) TIMES WITHIN (10) SECONDS FROM TURNING OFF MACHINE. PRESS AND KEEP PRESSING BUTTON C FOR THREE (3) SECONDS UNTIL P-00 STOP IS ON THE DISPLAY.
A-02 CARL MAX FILL TIME MIN 1 MIN MAX 20 MIN DEFAULT 10 MIN A-03 VUOT MAX DRAIN TIME MIN 1 MIN MAX 20 MIN DEFAULT 2 MIN Error Codes ntcb E-01 Booster temperature probe faulty or not connected properly ntcu E-02 Tank temperature probe faulty or not connected properly FILL E-03 Water fill not completed within allocated time (10 min) Obstruction in water line, or faulty solenoid valve.
Level 3 Level 3 access will allow you test different components. 1 2 TURN THE MACHINE ON AND OFF BY PRESSING BUTTON A. (IF THE MACHINE IS ALREADY ON, TURN IT OFF BY PRESSING BUTTON A) PRESS BUTTON C SEVEN (7) TIMES WITHIN (10) SECONDS FROM TURNING OFF MACHINE.
PARTS LIST Part Number 10342 10349 10421 10422 10425 10433 10435 10441 10471 10472 10479 10493 10502 10534 10552 10556 10598 10609 11351 11510 11543 11586 11994 11998 12007 12008 12017 12019 12020 12021 12022 12024 12025 12027 12028 12030 12035 12037 12038 12039 12048 12049 12050 12051 12052 12053 12054 12055 12060 12074 12076 12128 12129 12760 12957 15006 Description CONNECTOR DIAMETER 6,5 CONNECTOR SMALL SQUARE NUT NUT NUT NUT SPRING F.
20589 20692 20693 20707 20713 20714 20715 20716 20718 20728 20729 20732 20741 20769 20779 20780 21616 21700 30049 30105 40226 40293 60003 60004 60007 60009 60010 60012 60050 60074 60075 60076 60081 60082 60083 60084 60089 60093 60102 60103 60109 60124 60130 60131 60132 60135 60137 60145 60163 60166 60177 60179 60187 60191 60194 FILTER FOR AUT.DET.DOSER 5X7 MAGNETIC SWITCH E5121VDA0196 MAGNET M302NCBCNC42 SUPPORT FOR ELECTRONIC CARD ELECTRONIC CARD POWER ELECTR.
MANUFACTURERS LIMITED WARRANTY Jet Tech Systems Corporation (Jet Tech) hereby warrants all new warewashers bearing the name JET TECH and installed within the continental United States of America or Canada to be free from defects in material or workmanship, under normal and regular usage and operation, for a period of one (1) year following the date of original installation, (unless specified otherwise) but in no event can exceed eighteen (18) months from the date of shipment from the factory.
SERVICE CALL REGULATIONS JET TECH ware washers are warranted as specified in the MANUFACTURERS LIMITED WARRANTY. Upon receiving the demand for repairs on a unit, we will create a work order or Warranty Authorization which will have all the pertinent information. We will send this form to you as a purchase order for service. We ask that you respect the times allocated on the form. Should more time is required to complete a service call, call us and ask for more time.
COVER PAGE 2 CONTACT 3 TOP OF DISHWASHER 4 ELECTRONICS 5 PROGRAMMING 6 PROGRAMMING (CONT) 7 PROGRAMMING (CONT) 8 PROGRAMMING (CONT) 8 ERROR CODES 9 LEVEL 3, TESTING 10 EXPLODED VIEW 11 EXPLODED VIEW (CONT) 12 EXPLODED VIEW (CONT) 13 EXPLODED VIEW (CONT) 14 PARTS LIST 15 PARTS LIST (CONT) 16 WARRANTY 17 WARRANTY REGULATION 18 LAST PAGE 18
