Product Overview

Distributed by: PipeMan Products, Inc. - Web: www.PipeManProducts.com - TF: 1-877-PIPEMAN (747-3626)
What about bread?
An old technique to stopping draining water is to put bread up inside the pipe. Jet Swets are an advance on
that solution, and superior to it in many significant ways:
• Jet Swets immediately hold an amazing 60–70 lbs of pressure! This water–stopping ability of Jet
Swets is unyielding and constant.
• Bread cannot hold back any pressure. Jet Swets hold 60–70 lbs.
• You have to wait a very long time before there is a trickle small enough to insert bread, which pretty
much defeats the point. You don't wait at all with Jet Swets.
• Using bread requires an almost total evacuation of the pipes, which releases much more water and
makes much more mess than is necessary for the job. You apply Jet Swets immediately after opening
or cutting into a pipe or fixture. Less water, less mess = higher professionalism = job security and
repeat customers.
• Bread ends up dissolving into a sticky substance that gums up all your fixtures. Jet swets leave zero
residue.
• Bread plugs are unstable and easily becomes dislodged if even the smallest change in system
pressure, which is very common during a repair. The Jet Swet gasket is a unique rubber/silicon
composite that adheres fantastically to the inside of any kind of pipe. Small to moderate, sudden
changes in pressure are no match for a Jet Swet.
What about Pipe Freeze Kits?
Another way of stopping draining water is to use freeze kits. Jet Swets are also superior to freeze kits in
many significant ways:
• Freeze kits require many different parts that are easy to loose. Jet Swets are each one tool for one
pipe. Jet Swets are as easy to use as a wrench, and do not require any assembly of losable parts.
• Freeze kits are heavy. Weight really comes into play when you are working on over–head pipes. Jet
Swets are light and held inside the pipe. You don't have to tire out your arms holding the tools, just
doing the job.
• Freeze kits create ice plugs, that when they start to melt, melt from the outside in. This creates a
small bullet of ice that flies through the system, knocking into, and possibly damaging other fittings
and fixtures. Jet Swets go into the pipe to plug it and come completely out of the pipe upon
completion. Nothing is left inside the pipe to damage the system.
Freeze kits, to freeze a pipe, require compressed gas that is heavy, dangerous and must be recharged
often. Jet Swets, like a wrench, do not require anything else to work perfectly. With proper
maintenance, the Jet Swet should work perfectly for years and years, and of course, Jet Swets do not
require a dangerous and heavy compressed gas to work.
One Year Warranty: Comes with one year warranty against all defects in material and workmanship.