User Manual

11
Operating
I
nstructions
Turning power on
Turn vehicle ignition “ON/ACC”.
Press power button on RSE front panel
or remote control.
Playing a Disc
Insert a disc (label side facing towards
you)
Make sure DVD –Disc is the selected
source.
Press play to start media.
Playing media from USB
Insert USB device into USB slot on
right side of unit.
Make sure USB is the selected source.
Use navigation buttons on remote to
control media files.
Playing media from AUX
input
Plug small male end of AV cable in to
3.5mm AV input on right side of unit
Plug other jack ends (RCA type) into
device to be played.
Make sure AUX is the selected source.
Play device per device instructions.
Playing media from
Wireless Display-may be
optional (screen mirroring
from smartphone, etc)
Select “Wireless Display” from source
menu. Follow screen mirroring
instructions on smartphone/device to
play media from.
Playing media from
HDMI/MHL input
Plug HDMI cable connector into HDMI
jack on right side of unit.
Plug other end of cable into device to
be played.
Make sure MHL/HDMI is selected
source.
Play device per device instructions.
NOTE: only devices with MHL or
HDMI output capability can be used.
Playing audio through
vehicle radio system (only
plays from Monitor A)
Depress FM on the remote control (if
FM button is depressed again, it will
turn off the FM transmitted)
Use the left/right navigation buttons
to select desired radio station to play
audio (88.5MHZ ~ 107.5MHZ )
Tune vehicle radio to station selected
on unit.
NOTE: Quality of audio may be
affected by station selected. Certain
radio stations may not be clearly
audible when FM transmitter is
turned on.