User's Manual

三、 Operating Instructions
A. POWER ON/OFF
1. Press the Power ke
y
, o
p
ened the Monitor A and Monitor B. The look at the screen is normal
yp
B.
Monitor A SOURCE button to switch the screen (Monitor A.Monitor B. AUX. TV).
Or
p
ress the Monitor B SOURCE button to switch the screen
(
Monitor B. AUX. TV.Monitor A
)
.
p()
To each other to see the picture and sound are normal.
C. FM Modulator Playback
1
2
Sound Around (ON / OFF) button to turn the FM modulator on. The screen will now display
FM SOURCE: Monitor A . The Audio portion of the source originating from
To listen to the audio portion of the viewed source though the vehicle’s
stereo system aim the remote at the driver’s side monitor and simply press the
the Driver's side headrest will now be audible through the vehicle's stereo. If a
different audible source is desired, press the Sound Around (ON / OFF) button again to select
on the driver’s side monitor.
To change the transmitting frequency, aim the remote at the driver’s side
can be changed by pressing the Sound Around (Select) button on the remote. Tune the vehicle’s
radio to the corresponding station to listen to the source that is displayed
different audible source is desired, press the Sound Around (ON / OFF) button again to select
Fm output ON and OFF. Once the desired audible source
has been selected, the transmitting frequency the FM modulator transmits on
The radio automatically search the radio to find the same with the Monitor A channel.
Listen to the radio, the sound is clear with or without noise or interference
(AUDIO sound source only from the Monitor A)
monitor and press the Sound Around (Select) button. Each press of the button advances the
(1. 88.3， 2. 88.7 , 3. 89.1 , 4. 89.5 , 5.89.9 , 6.90.3MHZ Circulating).
frequency as follows:
4