User's Manual

2-3. Control Element, Receiver
Front View of Receiver Rear View of Receiver
1. AV output cable with RCA or SCART.
2. 9VDC power adapter jack
3. AV output MINDIN jack
5
4. Channel selection DIP SW (as shown in Fig5)
Select the channel by setting the channel DIP SW to the ON position.
Fig5. CHANNEL SELECT DIP SW
DIP SW Function:
DIP SWS1-4: set one channel or multi–channel sequence function.
By setting multi–channel DIP SW to the ON position, channel
changes every four seconds
5. Power ON/OFF switch
6. Channel indicator BLUE LED
BLUE LED blinks according to the channel number you want
Note
: channel is shown with the blinking times of BLUE LED at
intervals of 4 seconds by setting the position of DIP SW (Double
In-line Package switch).
Examples:
A. Factory Preset Mode:
6
Fig3
1
2 3 4
ON
OFF
1
2 3 4
ON
OFF
Fig4