User's Manual

? Main Screen
2) DVR Setup
? Setup Menu
15
Menu
Directory
Camera Select
Record Select
Record Mode
Record Frame Rate
Video Quality
Record Schedule
Sub Menu
Hard Drive Setup
Sensor Setup
? Camera Select
System can display 4 camera video in one screen (Quad Mode). User can
configure which cameras can display. For example, 1234 will display all 4
cameras.
Press Select to modify setting and press  CH1 , CH2 , CH3 ,
 CH4 to set each channel separately. If channel are not open, system will
display as [OFF] on monitor.
? Record Select
Configure which channel is allowed to record.
? Record Mode
There are two modes for video recording,
 Each Mode : Compress and record each channel video separately
therefore user can enlarge single channel video to full screen display. For
example, use can turn off record function of CH-1 and CH-2 and then system
only record CH3 and CH4 video. Press CH1 , CH2 , CH3 , CH4 to
switch channel display when playback recorded video.
16
At first time DVR boot-up, all
cameras are OFF, please follow
chapter 5-2 to switch on all
cameras.
λ Upper left Ratio
of Hard Disk Space Used
λ Middle Channel Name( CH1
~ CH4)
λ Bottom rightDate and Time
A
t the moment, DVR is waiting for
command, press ? Menu? into
DVR setup process or ? Play? ,
Record? .
0% MAIN MENU
> CAMERA SELECT
1234
RECORD SELECT
1234
RECORD MODE
EACH
REXORD FRAMERATE
Press? Menu? into setup menu,
use? Up? and? Down? to selec
t
item, press ? Select? to modify
setting and ? Menu? to cancel
input and exit.
Password
Change
Main
Menu