User's Manual

λ ?-? No Record
λ ? T? Continue, (System Default)
λ ? S? Sensor Triggered.
Cooperate with many kinds of external
sensor equipment like PIR, Gas sensor.
DVR will not record video until external
sensor was triggered and output signal t
o
notify DVR during this specified period o
f
time.
? T?  Continue? S? Sensor Triggere
d
?-?No Record? ? Up
?
? Down ? ? Select Metho
d
λ OVERWRITE ENABLED
If you choose YES, recording
continues and overwrite previous
recording when hard disk drive
space is full.
If you choose NO, the recording
session stops when all hard disk
drive is full for recording.
λ MASTER HDD SIZE
It shows the size of the primary
hard disk drive installed in the DVR.
 Quad Mode : Compress and record all 4 channel video into one file,
therefore use can not enlarge single channel to full screen.
? Record Frame Rate
Record frame rate will affect the movement of object in recorded video. More
frames means more smooth movement and cost more hard disk space.
System default value is 30 fps, it means system will record 30 frame per
second. User can set frame rate as 30, 15, 10,7,5,4,3,2,1 frames per second.
? Record Quality
There are there level of record quality, High, Normal, Low, higher quality cost
more hard disk space.
Record frame rate, record quality and hard disk space will affect total record
time of DVR system.
? Record Schedule
User can define video record method by hour.
System default password : Press six times of  CH1 key
17
? Sub Menu—Password
? Sub Menu-Time
?
10 Hard Drive Setup
18
All keys can use as
password key except
Menu key is use for
cancel input and exit.
Configure DVR system time.
Press? Move Up? and ? Move
Down? to select digit and press?
Select? to modify. Press
? Menu? to finish input and exit.