User's Manual

41
SETUP PORT: This port is fixed and you can’t modify it, the value is 8000.
DNS: Press [Enter] and input numbers for the net mask.
IP ADDRESS: IP ADDRESS sets up the IP address press [Enter] and input numbers for the IP
address.
SUBNET MASK: Press [Enter] and input numbers for the net mask.
GATEWAY: Press [Enter] and input numbers for the default gateway.
2) When selecting PPPOE, you need to input PPPOE USER and PASSWORD provided by
ISP supplier.
MEDIA PORT: Port for private protocol of DVR and PC, default: 9000. If this port of
computer is applied by other server, please change to other free port.
WEB PORT: Http port. Default: 8090. If admin change WEB port to: e.g. 8088, port No.
should be added behind IP, http://192.168.15.145:8088 should input into IP of IE.
IP address: Fill in IP address according to the net of DVR.
PPPOE user and password: Enter the username and password provided by the internet
service.
Click the button [
] and the system will reboot automatically. After rebooting, the device
will save it and set the PPPOE as default network type. The IP address will be automatically
configure as dynamic IP of WAN.
3) When selecting DHCP, the server will allocate DVR IP address automatically.
NOTE: Save it when select DHCP and it will automatically connect with the server. Will allot
IP address when connect ok and the address will showed on the interface.