User's Manual

5.4.8 Video Setup

Click [System settings Video  Video Setup] to

enter [Video Setup] menu.

VGA resolution: Options include 1024*768˄VGA˅

and 1280*1024˄VGA˅

Sequential Time (SEC): This refers to sequencing

time when auto-sequence is enabled. Values can be set

from 1~300 seconds.

Channel: Select one channel to set up area covered.

Area Covered: Set privacy area. This device can be set

four pieces of privacy area for each channel.

Note: The device will restart when you modify

the VGA resolution.

5.5 Network

Move the cursor to [NETWORK] (the icon will

be highlighted when selected), and press [Enter]

to access setting interface. User can setup

“network”, “DDNS”, “email” and “mobile” and

“IP access”.

5.5.1 Network Setup

After selecting network mode - such as

staticǃDHCP and PPPOE allocation and

setup web port, you could visit DVR

remotely via the internet.

1) When selecting static allocation, you

need to set up an IP address, a subnet

mask, a gateway and a web port.

MEDIA PORT: Transfers video data

between client and device.

WEB PORT: Sets up the port of IE browser via HTTP.

The default number for the WEB port is 8090ǄBut model dependent.