User's Manual

SCHEDULE: This setup function allows

you to create a schedule for recording tasks

throughout the week, so that only certain

selected events are actually recorded on the

HDD. For example, you may set up the

system to record non-stop throughout the

business hours, making it an alarm-triggered

recoding at lunch time (that means no

recording will be performed unless an alarm

event happens), night time being set to

motion detection recording with certain

hours made more secure with the combined

alarm and motion detection triggered

recording, finally making it more sophisticated by specifically setting a no-record time slot

when you usually stay in the office alone at the wee hours of weekday mornings. You can setup

schedule as you want.

Please note that manual recording overrides all record settings and will be carried on until

stopped by the operator.

CHANNEL: You can select all channels or just one channel.

There are three modes for recording: MD, SENSOR, NORMAL and NO RECORD. Different

colors signify different recording modes: Red means alarm record, green means normal record,

grounding means no record, orange means MD record.

To set up weekly schedules, click on the box of the recording status you want (Alarm, Normal

or No record) and then click on each box in the schedule time line that you want this method to

apply to. Also you can left click to drag the frames on boxes in the schedule time line that you

want to. You can use the [FROM-TO] pull-down menus and COPY button settings to repeat

setting from one day to another day or all days.

After you complete the schedule you activate it by clicking the [

] button.

Scroll to

and press enter to restore to default settings.

Scroll to

and press ENTER to save the new settings.

5.4 Video

Move the cursor to [VIDEO] (the icon will be highlighted when selected). Press [Enter] to enter

the setting interface. You can use the direction keys and cursor to change the options.

When you select the option of alarm recording, in order for the actual

recording to happen, it is necessary to set the motion detection

sensitivity and area. Please refer to Section 5.6.7 Motion Detect for

details. When alarm recording is selected, please set the alarm

triggering settings beforehand.