User's Manual

enter the setting interface. You can use the direction keys and cursor to change the options.

5.3.1 Record Channel

This option allows you to select the camera

(channel) number whose settings you want to

modify. If you want the changes to apply to all

available channels, you need to select “All”. Make

the selection by pressing the arrow buttons; the

options include CH1, CH2, CH3, CH4 and ALL.

5.3.2 Record

“ENABLE” indicates that the channel is enabled for recording.

5.3.3 Record Bit-rate

There are three options: GOOD, NORMAL and LOW, corresponding to HIGHEST, HIGH and

NORMAL data stream standard. The bit rate of each channel for recording can be adjusted

independently.

5.3.4 Record Resolution

It indicates the setup resolution and code rate for recording. There are three options: D1ǃHD1

and CIF resolution. The resolution of each channel for recording can be adjusted independently.

5.3.5 Record Frame Rate

In this section you can choose the recording frame rate (frames per second) for current channel.

The higher the record frame rate, the more natural movement you will see in playback mode.

Make your choice depending on the precision with which you want to follow the events

unfolding before your cameras. It is possible to adjust each channel frame rate independently.

For PAL video output format, the default value of the system’s resolution is CIF and the default

value of the system’s frame rate is 25 frames per second with each channel, which means the

system, will record 100 frames per second with all channels. User can set frame rate from 1 to

25 frames per second for each channel. The maximum value of total frames per second with all

channels is 200 frames with CIF resolution for 4ch or 8ch and 400 frames with CIF resolution

for 16ch.

For NTSC video output format, the default value of the system’s resolution is CIF and the

default value of the system’s frame rate is 30 frames per second for each channel, which means

the system, will record 120 frames per second with all channels. User can set frame rate from 1

to 30 frames per second for each channel. The maximum value of total frames per second with

all channels is 240 frames with CIF resolution with 4ch or 8ch and 480 frames with CIF

resolution for 16ch.

5.3.6 Record Pack Time

There are four options: 15min, 30min, 45min, and 60minutes. It will pack as the mode you

selected when alarm record is disabled.

5.3.7 Record Mode

Record mode includes two options: “ALWAYS” and “SCHEDULE”.

ALWAYS: indicates that the device will start recording when it starts up.