User's Manual

36
30 DAYS and 90 DAYS”. If user chooses “CLOSE”, the recording stops when the hard disk
drive is full. It won’t record until “overwrite” is enabled. If user chooses “AUTO”, recording
continues and overwrites previous recording when hard disk drive space is full. If user chooses
“2 DAYS”, the recording record on the hard disk for two days at most. After two days, the
recording will be overwritten. The other options are similar to the “2 DAYS” option.
FORMAT HDD烉Move the cursor to select your device and press˰HDD˱to start formatting.
FORMAT USB: This function allows you to directly format the USB device.
5.2.6 Maintenance
Click [System settings  System 
Maintenance] to enter [Maintenance] menu.
SYSTEM UPDATE: Create a new root
directory called “dvrupgrade” on a thumb
driver, copy the update file to it, and then insert
it into USB port. Press [Enter] to upgrade the
firmware and it will display the process of the
system upgrade.
The system upgrade will require more than two
minutes. After completing the upgrade, the
DVR will restart.
LOAD DEFAULT: Restores all the settings to
factory settings.
REBOOT: Use this function to restart the device.
POWER OFF: Use this function to power off the
device.
AUTO MAINTAIN: When AUTO MAINTAIN is on, you can setup the time for device to
restart. The system will restart automatically according to the parameter chosen.
5.2.7 Information
Click [System settings  System  Information] to
enter [System INFO] menu. This interface includes:
device type, software version, release date, import
parameter and export parameter. You should export
parameter into your USB disk before importing
parameter from the USB disk, otherwise, you will be fail
to import parameter.
5.3 Record
Move the cursor to˰RECORD˱(the icon will be highlighted when selected). Press˰Enter˱to