User's Manual

34
DST: Daylight saving time. “On” means DST is enabled. You can setup the start time and end
time of DST. For example in left FIG, the start time is at 10:00:00 from Sunday of the first
week on January and end time is at 20:00:00 from Sunday of the second week on February.
Note: You must press
to save after you modify the time and date, your modifications
will not be saved if you exit directly.
5.2.4 User Management
Click [System settings System  User Management] to enter [User Management] menu.
This option allows user to set the device ID for the DVR and to switch system password. After
turning on password and clicking the [
] button, you should exit to login system to
manage users.
DEVICE ID: Set Number to identify device. The default name is “000000”
PASSWORD: Switch of password.
All of the following setting can be set by admin merely.
ADD USERS: Add new User. You can write down new user’s name and password. Password
should be written twice to confirm and password
can’t exceed 6 digits.
CHANGE PASSWORD: You can select the name
you want to change password and write a new
password. Before set new password, you should fill
in old right password.
DELETE USER: In this interface. You can select
the user you want to delete and click the [
]
button.
SET PERMISSION: It is a very important
function to set user different permission, such as
PTZ control, Manual REC, Playback/Back up, Setting, Ezoom, Mute/Mute Off, PIP, Auto
sequence, Update/Reboot/Maintenance/Format/Default.