User's Manual

23
PIP*1 PIP*2 VO SWITCH QUAD 6 SHOW 8 SHOW 9 SHOW
Hide Advance
The functions of the buttons present in the Tool Bar are as follows:
System configuration
Search, playback and backup of recorded files
MANUAL REC/STOP MANUAL REC: Click the [MANUAL REC] button to start
manual recording. Click [STOP MANUAL REC] menu or press [ˍ] button to stop manual
recording.
KEYLOCK: If the password is enabled, click “KEYLCK” to logout the system.
PTZ: Enters PTZ control.
/ / / / : Switching split mode between quad view, six, eight, nine and sixteen windows
(Depending on devise).
AUTO SEQUENCE: Click “AUTO SEQUENCE” on the tool bar to enable auto
sequencing, the channels with images will be in sequence: channel 1-channel 2-channel
3-channel 4-channel 1…… (4-CH DVR) Channels without images won’t display. To interrupt
auto sequencing, press any button or click the mouse while in auto sequence mode.
EZOOM: Click “EZOOM” to enter into zoom mode, and then click left key and drag to
select the area that you want to magnify. Right click to exit.
PIP 1*1: This feature displays a small picture in a full screen.
PIP 1*2: This feature displays two small pictures in a full screen.
VO SWITCH: Press the button [ ]ǃ [ ] or numerical button[ ] ten times when
there is no tool tar or click the button “VO SWITCH” on the tool bar, this will switch the main
menu between CVBS video output and VGA video output.
See the following subsections for a detailed description of each of these functionalities.