User's Manual

22
To full screen display a single channel you can press the corresponding numerical or positional
buttons on the remote (channel number is displayed in the top left corner of each window);
alternatively you can do so by left double-clicking on the desired window.
In order to return to the multi-screen view you could either double-click on the screen again or
press the single/multiple view button either on the remote control or the front panel.
You can choose to display the Status Bar, Tool Bar or neither of them by single right-clicking
on the screen. These three options alternate in sequence.
4.1.2 Status Bar
Located at the bottom of the screen, the Status Bar may be called up by pressing the Menu
button or right-clicking anywhere in the screen.
System time Approximate Remaining Hours of HDD recording
4.1.3 Login DVR
In live view, press the button “ ” twice or double-click right key of mouse on live view
to display tool bar, it will appear the login window if the
password is enabled.
You can login from the LOGIN window as shown as
previous fig. Select user name and user password via
numeric key-board. You can access the main menu by
pressing [
] if the password is enabled.
1ˊThe default password for Admin is “888888” and the default password for user1is “666666”.
For your convenience and system safety, you can change password of admin and add other
username.
2ˊThe Auto ID is used for connecting the IE interface. For detail operation please reference
appendix 6.
4.1.4 Tool Bar(Please Take Actual Machine Model As Quasi)
After logging in system, double click the right mouse, it will display the following tool bar.
PLAY KEYLOCK SEQ EZOOM Advance
SYSTEM SETTINGS MUTE ON/MUTE OFF PTZ
MANUAL REC / STOP MANUAL REC
Click the “ADVANCE” button and the screen will display the following figure: