User's Manual

Your HDD should be installed inside the DVR.

Please connect the HDD in the standard way,

screwing the HDD into the HDD brackets or DVR

base. All necessary cables are delivered with the

DVR. Use instructions that came together with the

hard drive for exact wiring and installation. Please

connect the power cable to the appropriate socket,

and the data cables to their corresponding

connectors.

For the list of HDD drives tested for compatibility

please see Appendix 2.

3.5.3 PTZ Control Connections----(Optional)

Connect the PTZ control jacks to the corresponding RS485 A and B interfaces on the rear

panel.



For detailed description of PTZ protocols, baud rates and IDs please refer to

the setu

section in the PTZ manual.

Power connector

Data connector