User's Manual

13
Rear Panel
Fig. 2-2
Item Physical connector Connector description
1
Antenna SMA input Ports
Can be connected 4 pieces 2.4GHz Antennas
2 PAIR1
CH1 Button for Transmitter and Receiver Link pairing.
3 PAIR2
CH2 Button for Transmitter and Receiver Link pairing.
4 PAIR3
CH3 Button for Transmitter and Receiver Link pairing.
5 PAIR4
CH4 Button for Transmitter and Receiver Link pairing.
6 USB port
Backup video recordings and connect the mouse via the USB port
7
CH2 Input select
Switch
CH2 input can also be preset wired mode (cable) (normal use is wireless
mode (RF)) by sliding Input Select Switch when CH2 input port was
connected a wired camera.
8 VGA output For connecting a VGA monitor
9
CH4 Input Select
Switch
CH4 input can also be preset wired mode (cable) (normal use is wireless
mode (RF)) by sliding Input Select Switch when CH4 input port was
connected a wired camera.
10 CH2 Input port CH2 can be connected wired camera port (BNC)
11 CH4 Input port CH4 can be connected wired camera port (BNC)
12 Video output Port for connecting a TV or a monitor (BNC)
13 Network(RJ 45) For connecting Ethernet cables
14 Sensor/Alarm/RS-485 Sensor/Alarm/RS-485 interface (see pin outs below)
15 Power jack Connect power supply - DC 12V/5A
16 Power Power switch
17
Fan
Cooling fan
18 Grounding Connect the machine to GND
Sensor/Alarm/RS-485 port functions:
Pin 1-G烉Sensor 1 input Pin 2-G: Sensor 2 input
18 17 16
1
14 13 12 11 10 9 7 6
3 4 5 2
8 15