User's Manual

49
 Perform the ActiveX control and pluggable unit
It’s extremely importation to “enable” the items above.
Prompt: Before control installation, please turn off the fire wall and the anti-virus
software.
6.3 Connection Setting
The remote access for the hard disk recording machine should be carried out through the
network. In the local area network connection, the IP address of the client-side computer must
be in the same network section with that of the hard disk recording machine. While in the wide
area network connection, just ensure that two sides can visit the public network, and connect
through the IP address or the dynamic domain name. The following will mainly focus on the
connecting and setting method for the local area network.
Step 1: Right click on “Network neighborhood” and click “Attribute” in the ejected menu to
open the “Network connection”.
Step 2: Double click to open “Local connection”.
Step 3: Click “Attribute”.