User's Manual

4. After logging on system successfully, there will be a setting page. You can set channel you

want to monitor, picture size and the refresh time. Click “OK” to take them effect.

5. Now you can get picture from the monitor channel. The picture will refresh in several

seconds automatically if you had chosen a refresh time in setting page. While you have chosen

manual as refresh mode, it won’t refresh automatically until you click “refresh”. The monitor

channel, the picture size and refresh time is decided by setting page. If you want to configure

again, you can click “Return” to configure parameters.

Note:

You can only monitor one channel. If you want to look over other channel, you should

return and configure channel number again.

8. MOBILE PHONE SUPPORT

A state-of-the-art feature of this DVR device is transmitting live feed from the CCTV cameras

to your mobile phone, so that you can have ‘on the go’ access to your surveillance system from

virtually anywhere in the world. Currently, there are a limited number of phones that can

support this feature: Windows CE Mobile, Symbian S60 3

Edition OS, Apple IPhone, Andriod

and Blackberry.

8.1 Windows Mobile

From the installation CD, install file “xxx.cab”

Note: Prior to using this feature,

you should apply for an Internet

connection service for your

mobile phone, such as 3G or 2.5G.

Please contact your mobile service

provider for details.

Choose the

channel you want

to monito

Choose picture size

for monitor

Choose refresh time