User's Manual

910805

Notice: The changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the equipment.

Label for end product must include “Contains FCC ID: NOQ3568BRF” or “A RF

transmitter inside, FCC ID: NOQ3568BRF”.

FCC ID Label Graph:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

Note:

If the product is too small to make so many text labels, only need to indicate the

FCC ID number on the label, but the above text will be printed in the manual or

packaging box.

IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements,

the antenna(s) used for this transmitter must be installed to provide a separation

distance of at least 20 cm from all persons and must not be co-located or operating in

conjunction with any other antenna or transmitter. No change to the antenna or the

device is permitted. Any change to the antenna or the device could result in the

device exceeding the RF exposure requirements and void user’s authority to operate

the device.

This module has been regulatory approved for integrations which meet the following

conditions:

1. The radio integration is embedded

2. The antenna must be installed such that 20 cm is maintained between the

antenna and users

3. The ‘Type’ and ‘Gain’ of the antenna selected for the integration of the external

antenna must meet the requirements as detailed in section.

Used outside of these conditions will trigger re-approval.

Type: 3568BRF

FCC ID: NOQ3568BRF