How-To Guide

Scan the QR code to download APP
①
②
Device not connected, please click to reconnect...

JesHome smart vision
Welcome to JesHome smart earpick!
Check how to use the smart earpick

Not
Health Report Use duration
My CenterMy Album

Open the APP and click Add
③
Hold the Power button to boot
Hold for 1 second,and the
blue indicator will light up
T
he e
ar c
a
na
l care e
xpe
r
t f
o
r you
r f
ami
l
y
Troubleshooting
If the above operation still fails to solve the problem, please contact our customer
service staff, we will further provide you with practical solutions.
Camera indicator does
Shut down and restart or reconnect to WIFI
APP crashes
Uninstall the existing APPand rescan the QR
code to install the latest version of APP
Silicone sleeve is loose
Remove the silicone sleeve and slowly re-insert
the earpick, or replace the silicone sleeve
Blue indicator flashes
Low battery, please charge the product
with the provided charging cable
After the product is connected to APP,
image cannot be displayed normally
Disconnect the phone from the WiFi of the earpick,
restart the earpick, and reconnect to WiFi
Unstable connection,
Restart the earpick andreconnect to the APP
Fault
No response after startup
Solution
Please charge with the provided charging cable.
The charging duration is 40 minutes
Serial Number
1
2
3
4
5
6
7
1. It is recommended to carefully clean the lens with cotton swab.
2. Please observe the surroundings before use, do not use it in
an environment where it may come into contact with moving
people or animals, do not use it in a moving vehicle, or in other
unstable environments. Please keep your body stable when using it.
3. This product is not suitable for children under 3.
4. To avoid accidental injury, children are prohibited from using this
product alone.
5. Do not place the machine in a humid environment for a long time,
or immerse the whole machine in liquid.
6. The product has built-in polymer battery, which must be charged
once a month if not used frequently.
Cautions
Warranty
Contact Information
Contact Content
S/N
1
User Name
1
Delivery address
1
1
1
Telephone
Dealer
Phone of Dealer
④ ⑤
Click to connect device
Connect product WIFI
JesHome-P1-XXXX
Wireless LAN
JesHome-P1-XXXX
Jump to the Phone Settings to connect the product WIFI
Connect your phone to earpick WIFI
Select "JesHome-P1-XXXX" and connect
Connection succeeded！
JesHome smart vision
Welcome to JesHome smart earpick!
Check how to use the smart earpick

It can be used for 30 minutes
Not
Health Report Use duration
Back to APP
Click to start using
Product parameters
Network Standard: IEEE 802.11b/g
Operating Frequency: 2.4GHz
Image Sensor: CMOS
Lens Diameter: 3.5mm
Image Transmission Pixel: 500W
Image Transmission Rate: 30FPS
Gravity Sensor: 3-axis smart gyroscope
Product Size: ∮14mm * H145mm
Product Weight: 14.2g
Product Model: P1
Ambient Temperature: -10℃~+50℃
Battery Capacity: 130mA
Charging Time: 45 minutes
Use Time: 65 minutes
Working Voltage: 3.7V~4.2V
Input Voltage: 5V-1A
Output Power: 0.5W
Charging interface: Type-C
Product accessories
Main unit ※ 1
Type-C charging cable ※ 1
Instructions ※ 1
Accessories Bucket ※ 1
Silicone Earpick Sleeve ※ 6
Component
Name
(Pb) (Hg)
(Cb)
(Cr(VI))
(PBB)
(PBDE)
Circuit board
casing
wires
plastic
silicone accessories
Note: "○" means that the percentage content of this hazardous substance does not exceed the standard
connected
connected
My Album
My Center
7. Please charge the device with 5V charger. It is forbidden to use this
9. Do not place heavy objects on top of the machine.
8. Avoid exposing the product to direct sunlight.
device when it is under charging state.
10. During use, the temperature of the product will rise slightly (up
to about 35°), which is normal
not light up
B l u ei n d i c a t o rf l a s h e sq u i c k l y
quickly
i ti se a s yt od i s c o n n e c t
it is easy to disconnect
or freeze when using
Blue indicator flashes
Product name:Intelligent visual ear pick