Installation Guide

INSTALLATION INSTRUCTIONS
WS 825 • BRIGHTON
ADA Compliant LED Wall Fixture
Line Voltage LED Wall Sconce
www.jescolighting.com
[e-mail]
Tech Support: 855.592.0029
Instruction sheet subject to change without prior notice.
15 Harbor Park Drive
Port Washington, NY 11050
Main Line: 800.527.7796
Fax Line: 855.265.5768
219 South 6th Ave
City of Industry, CA 91746
Main Line: 855.654.0110
Fax Line: 626.333.2955
JW12232015
Page 2
1
TURN OFF ELECTRICITY
at main fuse box (or circuit breaker box) before
beginning installation by switching circuit breaker
off or removing fuse.
MIN 90º C SUPPLY CONDUCTORS.
CONSULT A QUALIFIED ELECTRICIAN TO
ENSURE CORRECT BRANCH CIRCUIT
TOOLS INCLUDED HARDWARE INCLUDED
HEX KEY WIRE NUTS OUTLET BOX SCREWS
ON OFF
4
2
5
3
TURN OFF ELECTRICITY
AT MAIN FUSE BOX
DETERMINE IF THE FIXTURE WILL BE MOUNTED VERTICALLY
OR HORIZONTALLY. REMEBER MOUNTING PLATE POSITION,
UNSCREW MOUNTING SCREWS WITH THE HEX KEY AND
REMOVE THE MOUNTING PLATE FROM FIXTURE. SAVE
MOUNTING SCREWS FOR LATER USE.
MOUNT FIXTURE TO MOUNTING PLATE WITH
MOUNTING SCREWS. TURN POWER BACK ON.
SECURE MOUNTING PLATE TO OUTLET BOX WITH
INCLUDED OUTLET BOX SCREWS.
SECURE WIRE CONNECTIONS, WHITE TO WHITE,
BLACK TO BLACK, GROUND TO GROUND WITH A
WIRE NUT. CAREFULLY TUCK CONNECTED WIRES
AND WIRE NUTS INTO THE OUTLET BOX.
OUTLER BOX SCREWS
HORIZONTAL VERTICAL
MOUNTING PLATE
HOT
(BLACK)
NEUTRAL
(WHITE)
GROUND
(GREEN OR COPPER)
MOUNTING PLATE
MOUNTING SCREW
MOUNTING PLATE
MOUNTING SCREW
WIRE NUT