Specifications
LV109
Type
MESH BACK CYLINDER TRACK LUMINAIRE
Project
Catalog No.
www.jescolighting.com 15 Harbor Park Drive 219 South 6
th
Ave
support@jescolighting.com Port Washington, NY 11050 City of Industry, CA 91746
Tech Support: 855.592.0029 Main Line: 800.527.7796 Main Line: 855.654.0110
Fax Line: 855.265.5768 Fax Line: 626.333.2955 1/8/2016
Specifications subject to change without notice.
Page 1
DESCRIPTION
Low voltage MR16 track fixture in a contemporary cylinder design.
Suitable for residential, retail or hospitality application.
CONSTRUCTION
Molded polycarbonate transformer housing and track fitting.
Spring loaded locking tab.
Die-formed double steel yoke.
Die cast aluminum lamp housing.
Powder coat painted lamp housing.
Half dome steel mesh back.
350° horizontal, ±90° vertical aim adjustment.
Two aim locking knobs.
MOUNTING
Provides electrical and mechanical connection track system.
ELECTRICAL
Electronic transformer for 12V halogen lamps. Ceramic Bi-Pin socket
connected to 18AWG leads in fiberglass sleeve.
DIMMING
Use only dimmers specifically designed for use with electronic
transformers. Low voltage fixtures may produce audible sound when
used with dimmers.
LAMPS
MR16 12V 50W max
Optics
Accepts one accessory in place of tempered safety glass included.
LOW VOLTAGE FIXTURE EXTENSION
Extends lamp housing from transformer housing.
Ordered separately. Factory assembled.
BK, WT
LVFE06 6” nominal, 8.5” actual
LVFE12 12” nominal, 14.5” actual
LVFE18 18” nominal, 20.5” actual
LVFE24 24” nominal, 26.5” actual
LVFE36 36” nominal, 38.5” actual
LVFE48 48” nominal, 50.5” actual
LABELS
cULus Listed
WARRANTY
18 months
ORDERING INFORMATION
SYSTEM SERIES FINISH
H2 = Jesco H1 Track or Halo
1
Power-Trac LV109 B
K
– Black
WT – White
H2 LV109
Notes:
1
Halo is a registered trademark of Cooper Lighting.