Use and Care Manual

Condenser Cleaning
Working for a period of time, the condenser will stick the dust to affect the heat dissipation, and the
cooling effect will become worse (such as: the output of the Slush Machine decreases or it is difficult
to take shape at the same time). Please clean once a month (if the environment is poor, please clean
once a month), be sure to ask a professional cleaner to
clean, turn off the power before cleaning, and be
careful not to damage the fins of the condenser.
Condenser location of double-headed Slush Machine.
Remove the cover on the left board. Remove the four
retaining screws with a Phillips screwdriver. Just
remove the left plate. Condenser location of single-
head Slush Machine. Remove the upper cover of the
left and right-side plate. Remove the left and right-
side plate retaining screws with a Phillips screwdriver.
Remove the left and right-side plate, remove the rear
panel fixing screw with a Phillips screwdriver, and
remove the rear panel.
Circuit Schematic
Wiring diagram of single tank slush machine
Condenser
Fixing screw hole
Left panel
19