Use and Care Manual

4. Disconnect the drip tray
First, pull the residual pipe out of the drip tray, and then
lift the water box up vertically to remove the drip tray.
When disassembling the drip tray, do not drag the residual
pipe at will, so as not to damage the residual pipe. The
drip tray should be emptied and cleaned every day.
5. Cleaning accessories.
All removed parts should be thoroughly cleaned.
Note: the cleaning method must conform to the current health standards of the country
where the machine is used.
Please follow the following methods to clean the parts:
·Pour an appropriate amount of neutral cleaning agent into a container of appropriate size, and then
add the appropriate proportion of water to dilute the cleaning agent.
·Clean the surface of the removed parts with a soft rag glued to a diluted cleaning agent, and then
rinse the parts thoroughly with clean water.
·Pour the right amount of food-grade disinfectant into another container of the right size, and then
add the appropriate proportion of water to dilute it.
·Thoroughly rinse the parts with a cleaning agent and soak them in a diluted disinfectant for about
30 minutes, then take them out and rinse thoroughly with clean water.
·Place the disinfected and cleaned parts in a clean place to dry naturally.
6. Clean the evaporator
Wipe the evaporator surface and evaporator base with a
soft rag glued with diluted cleaning agent, then wipe the
evaporator surface and evaporator base 2-3 times with a
clean wet dishcloth. Wipe the evaporator surface and
evaporator base several times with a soft rag glued to
dilute disinfectant, and leave the disinfectant on the
wiping surface. After half an hour, wipe the evaporator
surface and evaporator base thoroughly with a clean wet
dishcloth.
7. Clean the tank cover
Wipe the outer surface of the tank cover with a clean wet rag.
Wipe the bottom surface of the tank lid several times with a soft
dishcloth glued to dilute disinfectant, and leave the disinfectant on
the wiping surface. After half an hour, wipe the bottom surface of
the tank cover thoroughly with a clean wet rag, and then dry the
bottom surface with a clean dry rag.
Drip Tray
Residual pipe
Evaporator
Evaporator base
Top
Bottom
16