Use and Care Manual

Note: The tank must be cleaned at least
once a day, in any case, it must be in
line with the health standards
implemented in the country, and the
frequency of cleaning may need to be
increased according to the actual
situation. For more information, please
consult the product supplier. If the
machine is not in continuous use
throughout the day, wipe the material
outlet area with a clean soft dishcloth
(box area below).
Do not clean or maintain cleaning the
machine when the plug is not unplugged
or the power switch is not turned off.
Not thorough cleaning will lead to a
large number of bacteria.
Steps for cleaning
1.Empty the raw materials in the tank
Only turn on the stirring function, then
place the container under the outlet and
press the rebound handle to clean the
material in the cylinder. After draining the
raw materials from the tank, turn off the
power, and then unplug the machine.
2. Remove the outlet parts.
Loosen the left handle pin nut on the hand
pin counterclockwise, remove the handle
pin, then remove the handle, then remove
the upper cover of the discharge spring and
the discharge spring, and finally remove the
valve stem.
Outlet area
Handle pin
Handle
Discharge Spring
Valve stem
Raw materals
in tank
14