Use and Care Manual

Due to the improvement and serialization of the product, we apologize that the product
you have obtained may not be completely consistent with the diagram of this manual.
1.Raw material preparation
In a suitable container, dilute the concentrate with water
and stir according to the manufacturer' s instructions. The
minimum sugar content should not be less than 13% as low
concentration may damage the machine.
2. Open the lid
3. Pour in the raw materials
Note:do not load hot liquid (temperature
more than 24 degrees Celsius).
The raw material should not exceed the
maximum level line (about 10L) or lower
than the minimum level (about 6L).
Mix the ingredients well and pour them into two cylinders.
Maximum level line
Minimum level line
Prepared raw
materials
Follow the instructions below to remove the lid.
A.Raise the back of the lid.
B.Then,push a little in the direction of the arrow to remove
the whole lid
Warning:do not open the lid by force.
11