Manualshelf

Instructions / Assembly

ManualsBrandsJEREMY CASS ManualsAppliancesDouble Infrared Burner 7.1 in. Black-Marble Countertop Hot Plate with Temperature Control, Automatic Shut-Off
1234567
6
Before Using the appliance for the First Time
1. Remove and safety discard any packaging material and promotional labels before
using the appliance for the first time.
2. Wipe the appliance with a soft damp cloth and dry thoroughly.
3. Place the appliance on a dry, level heat resistant surface.
4. There is a protective sticker applied on the Stove as part of the manufacturing
process. This sticker must be removed before you use the appliance for the first
time.
5. NOTE: When turned on for the first time, the appliance may give off vapours for up
to 15 minutes. This due to the protective substances on the heating elements. There
is no need for concern and the vapours will dissipate with use.
Operating Your Infrared Cooker
1. Select a suitable position close to an electric socket, on a dry and flat surface.
2. Check that the voltage marked on the product is the same as your supply voltage.
3. Completely unwind power cord and insert power cord into a 120V power outlet.
Switch on at the power point.
4. Place a saucepan, in which the food will be cooked, on the appliance.
NOTE: To achieve optimum performance, ensure the diameter of the cooking pot or
pan is no larger than the diameter of the appliance.
5. Make sure that the Knobs are turned to OFF setting, plug the appliance.
6. Turn the Knobs to “MIN” position, when hear a click sound means the appliance is
on setting, then select the desired temperature setting using the Temperature and
Power Control Knob. The Indicator Light will illuminate when the appliance is
preheating and cooking. The light may cycle on and off during operation. This cycling
is normal and indicates that the correct temperature is being maintained.
NOTE: The temperature settings are adjustable and can be changed at any time
during the cooking.
7. To switch the appliance off, turn the Temperature and Power Control Knobs to the
OFF position, and then turn the power off at the power outlet and unplug power
cord.
NOTE: Due to the Infrared Cooker’s construction, some residual heat will remain
after switching off the appliance. This may be used to keep food warm for a short
period of time after it has been cooked.
8. WARNING! Fully unwind the power cord before use. Do not allow power cord to
come in contact with the appliance. Do not move the appliance until it is completely
cooled down.
9. WARNING! For more efficient performance it is recommended to use a lid when
boiling water.
OPERATING INSTRUCTION