Use and Care Manual

Surface Burners
Fire or explosion Hazard:
Do not operate the burner without all burner
parts in place.
A. Burners-Place surface burners into
corresponding positions on cooktop.
B. Caps-Place caps on proper size burner
Pressure Regulator Installation
A:Cooktop air pipe joint
B:Pressure Regulator
C:Gas fitting
D:End of fitting with 1/2 BSP male thread
First,make sure that the pressure regulator arrow points toward the cooktop air pipe
Joint,and then fasten the pressure regulator to the cooktop air pipe.
Then install the gas fitting on the other side of the pressure regulator.
The cooktop valve is in the closed state,open the air supply valve,coated the
connector with moderate amounts of soapy water,if there is air bubbles that is
means there is leakage,tighten the connector and test again.If repeat 3 to 4 times
and there is still air bubbles,notify professionals to deal with it.
7