Use and Care Manual


Adapting To Different Types of Gas
Before carrying out any maintenance work,disconnect the appliance from the gas and
electric supply.
To change the nozzles of burners use the following procedure:
Lift up the burners and unscrew the nozzles using an adjustable spanner of 7mm and
change the nozzles(Picture “J”) with those designed for the new gas supply according to
the information shown below.
ATTENTION:After carrying out the changes described above,the technician must put
the card corresponding to the new gas supply on the appliance to take the place.this
card is found in the bag containing spare nozzles.
Burner
Type of Gas
Pressure/mbar
Nozzle Diameter
1/100mm
Auxiliary
Natural 20
20
91
Butane 30
30
60
Semi-Rapid
Natural 20
20
116
Butane 30
30
76
Rapid
Natural 20
20
157
Butane 30
30
96
Triple-ring
Natural 20
20
168
Butane 30
30
110
Recommended Pan Diameters
BURNER
PAN DIAMETERS Recommended(cm.)
Auxiliary
12-14
Semi-Rapid
14-26
Rapid
18-26
Triple-ring
22-26
10