Use and Care Manual

Electric Connections
Shock Hazard:This appliance must be properly
grounded.Failure to do so can result in electric shock.
Electrical Requirements--110-120volt,60Hz,properly grounded circuit protected by a
15-amp or 20-amp circuit breaker or time delay fuse.It is recommended that a
separate circuit serving only this cooktop be provided.
NOTE:Use of automatic, wireless, or wired external switches that shut off power to
the appliance are not recommended for this product.
Grounding
The power cord of this appliance is equipped with a three-prong(grounding) plug
which plugs into a standard three-prong grounding wall receptacle to minimize the
possibility of electric shock hazard from this appliance.
The customer should have the wall receptacle and circuit checked by a qualified
electrician to make sure the receptacle is properly grounded.
Where a standard two-prong wall receptacle is encountered,it is the personal
responsibility and obligation of the customer to have it replaced with a properly
grounded three-prong wall receptacle.
DO NOT,UNDER ANY CIRCUMSTANCES,CUT OR REMOVE THE
THIRD(GROUND)PRONG FROM THE POWER CORD.DO NOT USE AN ADAPTER.DO
NOT USE AN EXTENSION CORD.
WHEN ALL HOOKUPS ARE COMPLETED
Make sure all controls are left in the off position.Make sure the flow of combustion
and ventilation air to the cooktop is unobstructed.
Check that all packing materials and tape have been removed.This will include
adhesive tape,wire ties,cardboard and protective plastic.
Failure to remove these materials could result in damage to the appliance once the
appliance have been turned on and surfaces have heated.
8